|
 | | SYS-5026T-TB | - SuperServer 5026T-TB (Black)
|
| | |
| | CPU | - LGA 1366 Socket
- Intel® Core™ i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core™ i7 series
- Intel® Xeon® 5600/5500 series
- Intel® Xeon® 3600/3500 series
| | System Bus | |
| | |
| | Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
| | Memory Type | - 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® X58 Express chipset
- ICH10R
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | Network Controllers | - 2x Intel® Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | | | Super I/O | | | Clock Generator | |
| | |
| | PCI-Express | - 3 (x8) PCI-e 2.0 slots (1 using x16 slot)
- 1 (x4) PCI-e slot (using x8 slot)
| | PCI | |
| | |
| | Serial ATA | - Six SATA ports
- Six SATA hard drives supported
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 8x USB rear ports
- 2x USB on-board
- 1x USB internal header(2 ports)
- Total 12 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| | |
| | BIOS Type | - 4Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | 3.5" (89mm) | | Width | 16.8" (426mm) | | Depth | 25.6" (650mm) | | Gross Weight | 50 lbs (22.7kg) | | Available Colors | Black |
| | |
| | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
| | Optional Front Bezel | |
| | |
| | Hot-swap | 6x 3.5" SATA Hot-swap drive trays | | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay |
| | |
| | CD-ROM | TEAC Slim 24x CDROM Drive (Optional) | | Floppy | 3.5" 1.44MB Floppy Drive (Optional) |
| | |
| | 1x 2U SATA backplane |
| | |
| | Fans | |
| | |
| | 400W AC high-efficiency power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 6-2.7 Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | Certification |  80 PLUS Certified |
| | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
