|
 | | SYS-5026Ti-BTRF | - SuperServer 5026Ti-BTRF (Black)
|
| | |
| | CPU | - LGA 1156 Socket
- Intel® Xeon® X3400 series
- Intel® Xeon® L3400 series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
|
| | |
| | Memory Capacity | | | Memory Type | - 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | | | SATA | - 6x SATA (3 Gbps)
- RAID 0, 1, 5 support (Windows)
- RAID 0, 1 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Dual Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | | | Super I/O | |
| | |
| | Serial ATA | - Six Serial ATA ports
- 3 SATA hard drives supported
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal header (4 ports)
- Total 7 USB 2.0 Compliant
| | VGA | | | Serial Port | - 1 Fast UART 16550 serial port
|
| | |
| | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | 3.5" (89mm) | | Width | 17.2" (437mm) | | Depth | 28.5" (724mm) | | Gross Weight | 85 lbs (38.6kg) | | Available Colors | Black |
| | |
| | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
|
| | |
| | PCI-Express | - 1 (x16) PCI-E 2.0 (Low Profile)
|
| | |
| | Hot-swap | - 3x 3.5" SATA Hot-swap drive bays
|
| | |
| | 2U Hard drive Backplane |
| | |
| | Fans | |
| | |
| | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| | With Power Distributor | - +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
| | Certification |   80PLUS
Platinum Certified
[ Test Report ] |
| | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
RoHS
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
