The Sun Netra CP3020 Opteron ATCA Blade brings the efficiency of AMD's x64 processor technology to the ATCA form factor. This single- or dual-core AMD Opteron processor-based blade outperforms competing Xeon-based ATCA blades by up to 10 percent. This blade consumes so little power it can offer two 2.5-inch SAS hard drives, two expansion slots, compact flash support, and double the number of memory slots found on competing Intel-based ATCA blades - all within the defined ATCA power budget. Plus, the Netra CP3020 Blade offers support for both the Solaris OS and carrier-grade Linux.
At a Glance
Single- or dual-core AMD Opteron processor
Choice of Solaris 10 OS or MontaVista Linux
Linux support direct from Sun
4 DIMM slots support up to 8 GB main memory
Support for 2 GB compact flash memory
Support for up to two 2.5-inch SAS hard drives
2 PMC expansion slots
Common Rear Transition Module (RTM) connector simplifies cabling
Simplified management via PICMG 3.0
Key Specifications
Single- or dual-core AMD Opteron processor
Choice of Solaris or MontaVista Linux operating systems
4 DIMM slots support up to 8 GB main memory
Supports up to 8 GB compact flash
Architecture
64-bit x86, PICMG 3.0/3.1-compliant
Processor options
Single-socket-940 AMD Opteron processor (100 series); single-core and dual-core-capable
Speed
1.8 and 2.2 GHz
Main memory
Up to four DDR-1 VLP DIMM slots; one GB,or two GB per DIMM; four or eight GBmax.memory
Two 10/100/1000Base-T management ports, two 1000Base-T Base Fabric, two 1000-series Extended Fabric; one RS-232C Serial Port, parallel N/A
I/O interfaces
Two 10/100/1000Base-T management ports, two 1000Base-T Base Fabric, two 1000-series Extended Fabric; one RS-232C Serial Port, parallel N/A
Ports
Two SAS ports on rear panel
System management
PICMG 3.0 Base specification
PCI
Two 33 MHz, 64-bit, 3.3 V signalling only ASICs
Serial port
One asynchronous serial port available on front or on rear (via RTM)
Connectors
Front I/O ports, RS-232 Serial Interface (RJ45); dual 10/100Base-T management ports Rear requires optional rear transition module, PMCs
Front panel LED
Power, hot-swap, alarm/user
8-U, single-slot ATCA
Height
322.25mm
Width
280mm
Depth
30.48mm
Rackmounting
Fits 19-inch, 23-inch, 24-inch, and 600mm racks
Operating temperature
5° C to 40° C (41° F to 104° F) five to 85 percent relative humidity, noncondensing short term. -5° C to 55° C (23° F to 131° F) five to 90 percent relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb.water/2.205 lb. dry air)
Nonoperating temperature
5° C to 40° C (41° F to 104° F) five to 85 percent relative humidity, noncondensing short term. -5° C to 55° C (23° F to 131° F) five to 90 percent relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb.water/2.205 lb. dry air)
Cooling
Available upon request
Power
200 W output power, -48 V
Seismic
Meets GR-63-CORE requirements for earthquake risk Zone 4
Acoustic
Declared noise emissions in accordance with ISO 9296: 7.0 B (operating and idling)
Купить / Заказать / Узнать цену