|
 | | AS-4041M-T2R | - A+ Server 4041M-T2R (Beige)
| | AS-4041M-T2RB | - A+ Server 4041M-T2RB (Black)
|
| | |
| | CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
| | Chipset | |
| | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128GB of DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR2 800/667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
| | IPMI | - Intelligent Platform Management Interface v2.0 (Optional: AOC-SIMSO R3.00)
- 200-pin IPMI slot (SIMSO)
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
- RMM (Remote Management Module)
- (Card not included)
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
| | Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Super I/O | | | VGA | - ATI ES1000 Graphics Controller
|
| | |
| | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 Header
| | Parallel Port | - 1 ECP / EPP parallel port
| | VGA | |
|  | | |
| | Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit (MCP-290-00001-00)
| | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| | Ports | |
| | |
| | Hot-swap | - 5 x 3.5" Hot-swap SATA Drive Trays
| | Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| | |
| | Floppy | |
| | |
| | PCI-Express | - 1 x16 PCI-e / HTX Slot*
- 1 x8 PCI-e Slot
| | PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
|
| | |
| | SATA Hard Drive Backplane |
| | |
| | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
| | Shrouds | |
| | |
| | 1000W AC-DC high-efficiency power supply w/ PFC + PDB | | AC Voltage | - 100 - 240V, 50 - 60Hz, 15 - 7Amp
| | +5V standby | | | +12V | | | +5V | | | +3.3V | | | -12V | |
| | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
| | FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST 49LF080A BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Купить / Заказать / Узнать цену
